Аутори:
1. Dejan Kojić, Univerzitet za poslovni inženjering i menadžment, Tehnički fakultet, Banja Luka, Republic of Srpska, Bosnia and Herzegovina
2. Gordana Markovic, Tigar A.D., Pirot, Serbia
3. Milena Marinovic-Cincovic, University of Belgrade, Vinča Institute of Nuclear Sciences, Serbia, Serbia
4. Vojislav Jovanović, PMF Kosovska Mitrovica, Serbia
5. Suzana Samaržija-Jovanovic, PMF Kosovska Mitrovica, Serbia
6. Nevena Vukic, University of Novi Sad, Faculty of Technology, Serbia, Serbia
7. Jaroslava Budinski-Simendic, Универзитет у Новом Саду, Технолошки факултет, Нови Сад, Serbia

Апстракт:
The use of reclaiming scrap waste rubber is of great ecological interest due to its significant influence to the environment. Powdered waste rubber (WRP) can be used as a filler in mixtures with rubbers, thermoplastics, and as modifiers for asphalt. In this work the composites based on natural rubber (NR) and chlorosufonated polyethylene (CSM) filled with different content of WRP were prepared on a laboratory-size two-roll mixing mill. The curing by sulfur was done at 160ºC. The mechanical properties, namely tensile strength, tensile modulus at 100% elongation, elongation at break and hardness have been followed up as a function of irradiation dose (100; 200; 300; 400 kGy) as well as waste rubber powder content (0; 20; 40; 60; 80; 100 phr). It was assessed that the addition of 20 phr waste rubber has improved the properties of obtained elastomeric materials. The improvement of composites mechanical properties is in correlation with homogeneous WRP distribution which has been assigned by scanning electron microscopy (SEM).

Кључне речи:
composites, elastomer, waste rubber powder, gamma irradiation

Тематска област:
Хемијске технологије

Датум пријаве сажетка:
19.08.2016.

Конференцијa:
XI Savjetovanje hemičara, tehnologa i ekologa Republike Srpske

Финални рад