Аутори:
1. Sadoon Ayed, Универзитет у Нишу, Машински факултет, Serbia
2. Milos Jovanovic, Универзитет у Нишу, Машински факултет, Serbia
3. Gradimir Ilić, Универзитет у Нишу, Машински факултет, Serbia
4. Predrag Živković, Универзитет у Нишу, Машински факултет, Serbia
5. Mića Vukić , Универзитет у Нишу, Машински факултет, Serbia
6. Mirko Dobranjac, University of Banja Luka, Faculty of mechanical engineering, Republic of Srpska, Bosnia and Herzegovina
7. Suzana Klječanin, The Public Institution Institute for materials and construction testing of Republic of Srpska, Republic of Srpska, Bosnia and Herzegovina

Апстракт:
Measurements of temperature distribution were performed in a rectangular tank with aspect ratios 4x2x1, using different working fluids. The experimental setup was adjusted taken to be as close to real fuel tanks exposed to solar radiation, as in airplane wings. The measurements were taken at fifteen different positions on the faces of the tank. Probes used are PT100 elements. As to obtain as uniform temperature as possible, double bottom was used, with water as medium for obtaining of the constant surface tmperature. The results are compared with the those obtained by IR camera.

Кључне речи:
Rayleigh–Benard convection,temperature profile,PT100,IR camera

Датум пријаве сажетка:
16.02.2013.

Конференцијa:
DEMI 2013

Пријављени рад од аутора